July 2014 saw the launch and fitting of new style of Sentinel Louvres across the full range of Technocover high security access products.
The aesthetic Sentinel louvre can be incorporated into UltraSecure single and double leaf padlocking and Sentinel key entry doors, either within the door itself or within blanking plates above or beside the door sets and can also be specified in UltraSecure single and twin door cabinets, kiosks, enclosures and walk-in modular buildings.
 |
 |
 |
 |
Benefits in Design
-
Certificated to LPCB LPS: 1175 Issue 7, security rating level 3 and 4.
-
Provides a minimum 40% free air-flow while preventing the ingress of undesirable elements.
-
Positive aesthetic appearance without compromise to security rating.
-
Rain drip strip, in addition to the vertical ribs and horizontal vent blades.
-
Sizes starting from 200 mm × 200 mm up to a maximum size of 800 mm high × 1250 mm wide with vent aperture sizes available in 50 mm increments in both directions within this scope.
-
Internal overall unit sizes (width and height) only 50 mm greater than the vent aperture face sizes.
-
Supplied with a back box and clamp facility to house either insect or vermin mesh which is mechanically fixed to allow for simple maintenance.
-
Facility to have fans or other proprietary items fitted.
-
All components hot dip galvanised to BS EN ISO 1461 after manufacture to enhance service life.
 |
 |
 |
|
For further details on Sentinel Louvres please contact our Business Development Department.
